Shopper Award

Garage Door Insulation Kit

Part #: RG-GDK


Category:

Type: reflective insulation


Pin It
 

Garage door insulation can reduce your energy consumption and lower your utility costs by better managing unwanted heat gain and heat loss that commonly occurs in a garage.  

  • RadiantGUARD® Reflex-AIR Garage Door Insulation Kit

    • blocks unwanted heat gain and heat loss creating a cooler garage in the summer and warmer garage in the winter (R-Value up to 6.0),
    • reduces noise as a sound barrier,
    • fits a garage door up to 18 feet wide and 8 feet tall or multiple smaller garage doors,
    • easy to install within an hour or less,
    • includes the following items:
      • four (4) 24 inch X 18 feet long rolls of our Reflex-AIR reflective double bubble reflective insulation.
      • one (1) 1.5 inch X 60 yard roll of double-sided tape
      • one (1) disposable knife
      • one (1) tape measure
    • is Class A / Class 1 fire rated which PASSES the current required ASTM fire test (ASTM E84-10 using the E2599 mounting method) for building materials,
    • is non-toxic, non-carcinogenic, fiber-free, and does not require protective clothing or respirators to install,
    • is not affected by moisture or humidity,
    • controls condensation by keeping warmer moist air away from cooler dry air,
    • does not provide a growth medium or nutritive value for fungus, insects or rodents,
    • does not support the growth of mold or mildew,
    • is covered by a 5-year warranty,
    • is Made In The USA,
    • and lowers heating and cooling costs year round.
  • Easy to install using either of the following installation instructions:

    Inside each door panel

    garage door insulation
    • Measure each garage door panel and cut insulation to fit inside the panel.
    • Using alcohol, clean the garage door panel where you plan to apply the double sided tape to ensure a strong adhesion.
    • Peel one side of the double-sided tape and press firmly and evenly to the section of the panel previously cleaned with alcohol.  Do not remove release liner from tape just yet.
    • Ensure the section of garage door insulation you previously cut fits properly within the panel.
    • Remove the release liner from the tape and firmly press the reflective insulation into the panel with firm pressure over the sections with the adhesive tape.
    • Repeat for remaining panels.

    On garage door frame

    garage door insulation
    • Measure and cut the reflective insulation to fit over/across the garage door panels on the framework.
    • Using alcohol, clean the garage door panel framework.
    • Peel one side of the double-sided tape and press firmly to the cleaned framework. Do not remove the release liner from the tape just yet.
    • Ensure the section of garage door insulation you previously cut fits properly over/across the framework.
    • Remove the release line from the tape and firmly press the reflective insulation onto the framework.
    • Repeat for remaining sections of the garage door.

Customer Reviews


Related Items

Reflective Insulation - Double Bubble 16-inch (166.7 sf)
Reflective Insulation - Double Bubble 16-inch (166.7 sf)
one (1) roll: $59.00 USD
+ Quick View
Reflective Insulation - Double Bubble 24-inch (250 sf)
Reflective Insulation - Double Bubble 24-inch (250 sf)
one (1) roll: $89.00 USD
+ Quick View

Reflective Insulation - Single Bubble 48-inch (500 sf)
Reflective Insulation - Single Bubble 48-inch (500 sf)
one (1) roll: $139.00 USD
volume: $134.00 USD
+ Quick View
Reflective Insulation - Double Bubble 48-inch (500 sf)
Reflective Insulation - Double Bubble 48-inch (500 sf)
one (1) roll: $169.00 USD
volume: $164.00 USD
+ Quick View

double sided tape
Double-Sided Tape (1.5 in X 180 ft)
one (1) roll: $15.00 USD
+ Quick View
foil tape
Metal Tape (3 in X 150 ft)
one (1) roll: $15.00 USD
+ Quick View